ENEE 206

Introduction

• Purpose of the Course:
  Build and Test Elementary Digital and Analog Circuits
  
  
• Goals of the Course:
  Equipment Use, Construction and Testing of Circuits, P-Spice Simulation Program

Course Information

• ENEE 206 Lab Mannual - Bookstore
  • General Information
    
  • Specifics of each laboratory experiment
    
  • Appendix containing Digital Circuits examples run in P-Spice
    
  • Common Chips used in the course - terminal descriptions
    
  • Manuals on Digital Oscilloscope and Logic Analyzer

Course Policies

• Attendance/On-Time
• Laboratory Make-Up's - Within one week of the start of the scheduled Lab
• Laboratory Report - Due one week after the scheduled start of the Lab
• Always turn in something on a Laboratory experiment, either on time or late; it is better than zero.

General Procedures for a given Laboratory Experiment

1. Preparation: Read background material and specifics for the Lab incluting questions that are being asked. Have circuit drawins and specific components/values indicated. Do a P-Spice Simulation of the circuit.
2. Partners
3. Come to the scheduled Lab session and build the circuit and obtain experimental data.
4. Laboratory Report: Do Analysis and Write-up the results.
5. Quality

P-Spice Circuit Simulations

• We will use Student Version initially and then transit to Full Version
• ASC Room - 0305 EAB
• JAS Room - 2446 AVW
• Open Lab - 0309 EGR
  
  
• Tutorial - First Week
• Analog Circuits - Do first two examples in Mayergoyz and Lawson Textbook for ENEE 204, Section 4.7, pages 126 - 134.
• Digital Circuits - Do both examples in Appendix B of the course's Lab Mannual.
  
  
• Make-Up for First Week P-Spice Tutorial
• Present a hard copy of the circuit and it's results for each of the above four examples. Turn them in to your TA at your next session.

Laboratory 1 - Introduction to Test and Measurement Equipment

• Purpose - Learn how to use the Signal Generator, DMM, Digital Oscilloscope, and Printer.
• Source
  Signal Generator - Amplitude, Frequencey, Shape
• Measurement Equipments
  DMM for measuring and setting voltage amplitude
  Digital Oscilloscope for measuring all properties of the signal pluls perform mathematical operations like subtracting two signals.
  
  
• Background Reading - Read appendix D entitled, "Getting Started Guide for the HP54501A Digitizing Oscilloscope." Make certain that you read the laboratory procedure ahead of time and answer the Pre-lab questions (p. 15) about the reading.